• <output id="lyfmj"><sup id="lyfmj"></sup></output>
  • <td id="lyfmj"></td>
  • <output id="lyfmj"><sup id="lyfmj"></sup></output>

      <var id="lyfmj"><output id="lyfmj"><source id="lyfmj"></source></output></var>

          <var id="lyfmj"><sup id="lyfmj"></sup></var>
          alizarinchina Merchants Join

          熱轉印紙常見問題的問與答 FAQ (2)

          dd6f61fa-30a2-440f-9842-0b0141bccab4

          33 問: 你們的熱轉印紙在純棉T恤上印,可以嗎?
          Is it ok for cotton t-shirt with your heat transfer paper?
          A: 可以的.只要是耐高溫的布料都可以使用我們的產品.
          Yes, it is ok for any fabrics which can resist high temperature.

          34、Q: 我們的熱轉印紙需要溫度和時間是多少?
          What is the temperature and when does it need about our heat transfer paper?
          A: 每一種產品都有他們的使用方式,不同產品需要不同的溫度和時間. 淺色轉印紙需要185度,時間15秒。
          深色轉印紙需要165度,時間25秒。
          Different products have their directions. So the temperatures and times are different. For light heat transfer paper, it needs 185oC, and 15seconds. For dark heat transfer paper, it needs 165oC, by 25seconds

          35、Q: 是否直接用普通的墨水打印?連供墨水的打印機也可以嗎?熱升華墨水呢?
          Is it printed by normal inks? What about CISS inks and sublimation?
          A: 是的. 并不需要特殊的打印機和墨水,只要用辦公室的打印機就可以使用我們的產品.
          Yes, we do not need special printer and inks. You can use the inkjet printer and inks in your office, and then print our inkjet heat transfer paper. It is no problem to use CISS inks, sublimation inks and any other inks.

          36、Q:普通打印機的墨水打印,會不會褪色?
          Is it fade when we use inkjet printer?
          A: 不會的.我們的產品都有經過水洗測試.至少能通過機洗60次以上.
          No, it is difficult to fade. Our products have been proved that you can wash your t-shirt above 60times by washing machine.

          37、Q:燙畫機的壓力調到多大比較合適?
          What is the pressure of press machine?
          A: 中等壓力或超大壓力.
          Moderate or high pressure.

          38、Q:打印后,怎么會溢墨?
          Why is it spilled inks when it was printed?
          A:打印時,設墨墨量為最小,選擇”照片”模式打印,而不是”文件”
          We should set the printer on Mini amount of ink when printing. We set “quality option” on “Photo”,but not “draft” about your inkjet printer.

          39、Q: 深色的紙為什么會泛白?
          Why does the whitening phenomenon occurs on dark inkjet transfer paper?
          A: 有這么幾種情況:a,溫度過高,降低溫度;b,時間過長,縮短時間;c,在防油紙的上面沒有放一塊棉布,請加一層棉布料
          These situations can occur to whitening phenomenon: a.the temperature is high, please down the temperature;
          b.the time is too long ,please use less time;c. you do not put a cotton on the grease proof paper,please do it.

          40、Q:HT-150R 撕不下來?
          Why can not been peeled off about HT-150R?
          A:一定要燙完后 應立即趁熱把背紙撕下來,時間不能等冷了再撕,所以速度要快.
          It should peel the back paper off with hot. You can not peel it off when the paper is cold ,so please quickly.

          41、Q: HT-150R 將背紙撕下來后,為什么會起毛?
          When peel the back paper of HT-150R, why is it pilling?
          A: 有2種方法可以解決.1.溫度不夠,適當調高溫度 2.燙完后,要趁熱把背紙撕下,不能等冷了再撕3.起毛的地方用防油紙覆蓋,再壓燙一次
          You can do these ways to solve it: 1.the temperature is low, please adjust proper temperature on the heat press machine 2.do not peel the back paper off when it is cold, please take it off with hot.3 put the grease proof paper on the pattern, and then use the press machine to transfer it again.

          42、Q:HT-150印燙后,背紙怎么起泡了?
          Why does the back paper have bubble with HT-150?
          A:溫度過高,在燙印之前,加一張防油紙在HT-150背紙上隔熱.
          The temperature is too high, please take a grease proof paper on the HT-150.

          43、Q: 如果第1次沒有燙不牢,能不能用燙畫機第2次燙???
          If it is not stable at first, should we use the heat press machine again?
          A:可以的。在燙不牢的情況下,鋪上防油紙后,再重新壓燙,這樣圖案就不易脫落,更加牢固。
          Yes, it is ok. if you find the image out of the fabric, please put a grease proof paper on the image, and then set heat press machine on 160OC , by 10seconds to transfer it again.

          44、Q:燙畫的衣服洗滌后能用電熨斗的蒸氣熨平嗎?
          Should we use the house iron with steam to iron the fabric which is finished transferring image after be washed?
          A:圖片燙印完成后,可以使用電熨斗,但不可以用蒸氣檔.你需要把防油紙或棉布放在圖案上面后,再熨平衣服。
          You can use house iron after finishing transfer,but do not use the steam function. You need to put the proof grease paper or a piece of cotton cover the image ,and the iron the fabric.

          44、Q: 為什么轉印的時候老是一個地方燙印不好,而且會起皮,但是其它地方都很好?
          Why does it good most parts of heat transfer paper, but some part is bad and it is pilling.
          A:放燙畫機的地方不平,導致轉印的時候受力不均衡,最后的結果是一部分燙印效果好,一部分比較差。
          燙印的時候需要一個平整的地方,這樣出來的效果才會更好。
          The place which is the heat press machine on is not formation, causing the uneven distribution when we are transferring. We need a stable ,heat-resistant surface for more better effect.

          45、Q: 我們的熱轉印紙是不是可以用熨斗燙?那燙的時候需要多少時間,壓力要多大?
          Is it ok for your products by house iron What is the time should we take? How pressure should we need ?
          A: 是的,我們的轉印紙可以用電熨斗。燙的時候,需要用大力氣燙1分鐘左右。
          Yes, our heat transfer paper is ok for house iron. It needs more pressure as you can for one minute.

          46、Q: 激光轉印紙圖案被粘壞了:
          Laser heat transfer paper surface image is broken ,
          A: 有3種可能性:1、激光機打印時選的紙張進紙厚度,選太薄了,解決辦法:請客戶進紙厚度,選擇較厚這一欄
          1: Setting printing paper thickness is too thin
          Solve methods: Before printing you should choose the thick paper in the laser printer

          47、Q:激光機剛加熱時,機身內溫度較高,可達到200度-300度,解決辦法:建議客戶先用普通紙過一下機子,讓機身內溫度穩定一點再用轉印紙打印,因為轉印紙面層有膠,膠的溶點在165度。
          2: The color laser printer temperature is high when the laser heating, it will reach on 200-300degree
          Solve methods: suggest use the normal A4 white paper pass the color laser printer in the heating
          After the heater is steady, you can printing the heat transfer paper, the paper surface is PU .The Melting temperature is 165degree

          48、Q:激光機內的搓紙頭上有殘渣,殘渣部份會粘住激光紙的面層,導致轉印紙圖案部份被粘住移位脫落在激光機搓紙頭上。
          A:用酒精或專用清潔液清潔一下激光機的搓紙頭,清潔完用普通紙先過一下機子。
          Q: In the laser printer, the Pickup head leave some dirty and broken image, so after printing,the dirty broken image will put on the surface laser paper
          A: Solve methods: cleaning the pickup head by alcohol or a special cleaner,
          After finish cleaning, use the normal paper pass the printer firstly.

          49、Q:我用你們的HT-150R淺色熱撕,怎么底紙上還有殘留圖案?
          A: 您用的是不是熱升華墨水,使用熱升華墨水會導致四分之三的圖案轉入圖層中,還有的一部分留在底紙上。而且升華墨水易拉絲。


          發布時間 2021-09-23

        1. 上一個:
        2. 下一個:
        3. 无码专区~va亚洲v专区
        4. <output id="lyfmj"><sup id="lyfmj"></sup></output>
        5. <td id="lyfmj"></td>
        6. <output id="lyfmj"><sup id="lyfmj"></sup></output>

            <var id="lyfmj"><output id="lyfmj"><source id="lyfmj"></source></output></var>

                <var id="lyfmj"><sup id="lyfmj"></sup></var>